Yahoo Message Number: 14273 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14273)
I want to change out the dim blue LED cab/dome light below the back-up camera.
I pulled the light down but there is no apparent "bulb" to replace. It is wired as a single unit.
Has anyone done this?
Thanks,
Rob
Fourwinds 34H
Yahoo Message Number: 14274 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14274)
If it looks like a all in one fixture. It may be LED. Look for a replacement fixture that will cover hole original fixture was mounted in.
Best
Ron Hall
Yahoo Message Number: 14275 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14275)
Curious, how do you remove it? I've looked at it a few times and wondered how to remove it.
Yahoo Message Number: 14276 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14276)
To remove, unscrew the lens or bulb cover. The light apparatus us held by two spring clips. I just pulled it straight down through the hole. I have attached four photos that may clarify.
Rob
Sent from my Samsung Galaxy Note® II
Yahoo Message Number: 14284 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14284)
Ok, I assume the piece that is removed is the black trim ring? That's what is visible on mine. A black trim ring with a lens in it.
Yahoo Message Number: 14285 (http://groups.yahoo.com/neo/groups/supercrvgroup/conversations/messages/14285)
Yes. That is correct. It is not shown in the pictures.
I have been online to try to find a similar bulb. No luck yet.......
Sent from my Samsung Galaxy Note® II