Skip to main content ↑ ↓
Topic: Basement Storage Door (Read 469 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Basement Storage Door

Yahoo Message Number: 14999
I put a significant boo boo on my propane tank access door by cutting to close to a safety pole while getting fuel. The unit is a 2005 Gulfstream Endura. It is in storage but I am going to go get the door and have it straighten and painted. I am assuming the door is fairly easy to remove. If not can someone tell me the issues. Thanks Doug Brothers

Re: Basement Storage Door

Reply #1 –
Yahoo Message Number: 15000
My LP door is round cornered with a aluminum frame. It is painted silver like most of the lower part of MH. Removing one screw will let this door slide out of track. Not sure how to remove other doors like on passenger side of MH.
Best
Ron Hall

Re: Basement Storage Door

Reply #2 –
Yahoo Message Number: 15001
Mine, has a plug either side with a rivet in from the top. You would have to drill it out to remove the plug and then slide the door off. Or just remove the whole frame, two screws in bottom two in top and pull the whole thing with door out. The hard rubber weather strip will come with it. And, as a bonus, seal the plywood edging around the hole before putting it all back together.