Hot Water Question May 03, 2015, 11:33:13 am Yahoo Message Number: 14471Good morning-First trip out this year with my GulfStream Endura- NO HOT WATER- worked fine last trip -1) Plenty of water and pressure2)Installed a new element last week3) The hot water heater is lighting and the element plug is HOTJust no hot water flowing-I don't remember any Hot Water by pass valve-Any suggestions?Steve Phillips Quote Selected
Re: Hot Water Question Reply #1 – May 03, 2015, 11:35:41 am Yahoo Message Number: 14472there should be a bypass valve. On my conquest it's behind the drawers under the hanging closet right aft of the galley... Bet you (or they if you had it done) didn't open the isolation.Morrigan Quote Selected
Re: Hot Water Question Reply #2 – May 03, 2015, 11:44:24 am Yahoo Message Number: 14473This is the only valve I rememberBest, Steve PhillipsVP of SalesCLC/Custom LeatherCraftOffice 800.860.0331 Quote Selected
Re: Hot Water Question [1 Attachment] Reply #3 – May 03, 2015, 01:24:11 pm Yahoo Message Number: 14474The valve shown in previous picture is on left side lower door, where water pump is. I have a 2006 Gulfstream Endura-6378 Quote Selected
Re: Hot Water Question [1 Attachment] Reply #4 – May 04, 2015, 09:04:09 am Yahoo Message Number: 14475that's the bypass valve. in the picture it is on bypass. the handle should rotate to the left so that the bent arrow on the handle shows flow to the normal flow point. i believe there is a descriptive picture behind the handle which should tell you how it should be for normal operation.On Sunday, May 3, 2015 11:44 AM, "Steve Phillips clcmo@... [SuperCrvgroup]" wrote: Quote Selected