Cab to bunk seal September 21, 2018, 11:27:45 am Yahoo Message Number: 16869Anyone have a good solution for resealing the seam between the overhead area and the top of the cab? We had a hard driving rain last night and I see evidence of minor water intrusion. Unit was facing west which likely contributed.Greg Thompson6340 Gulfstream Quote Selected
Re: Cab to bunk seal Reply #1 – September 21, 2018, 01:29:50 pm Yahoo Message Number: 16870Sealed the seam between cab front and roof with eternabond tape 6" width. Made sure any caulking/dirt was removed using acetone. Had to re tighten screws. Our 2007 Seneca has brown and black colors so we used black eternabond tape.---- "'Greg' [SuperCrvgroup]" SuperCrvgroup@yahoogroups.com> wrote: Quote Selected
Re: Cab to bunk seal Reply #2 – September 21, 2018, 01:42:35 pm Yahoo Message Number: 16871I used a plastic tube clamped to end of a caulk tube. It still was pain. Had to do a lot of clean up after applying caulk. Used OSI QUAD sealant.BestRon Hall Quote Selected
Re: Cab to bunk seal Reply #3 – September 21, 2018, 01:44:22 pm Yahoo Message Number: 16872What did you use to remove the old roof caulk? ? ? ? Quote Selected
Re: Cab to bunk seal Reply #4 – September 21, 2018, 01:47:50 pm Yahoo Message Number: 16873Attachments : Quote Selected
Re: Cab to bunk seal Reply #5 – September 21, 2018, 01:48:12 pm Yahoo Message Number: 16874Thanks Ron Quote Selected
Re: Cab to bunk seal Reply #6 – September 21, 2018, 03:09:32 pm Yahoo Message Number: 16875Looks like you got 2 different answers. My answer was for chassis cab to cab over. Mine had a rubber grommet between the 2. But it still leaked in heavy winds and rain. I also took covers off cutout inside cab and spread the the metal and fiberglass parts apart. Then caulked that space. That worked better than the outside caulk.I did the roof to cab over with Eternabond tape as already mentioned. Used alcohol to clean old caulk before applying.BestRon Hall Quote Selected
Re: Cab to bunk seal Reply #7 – September 21, 2018, 04:32:30 pm Yahoo Message Number: 16879I used Acetone to clean the roof before installing eternabond tape. that cleaned things off nicely.Mark2006 34SS-- Quote Selected