SAF-TEE TPMS (tire pressure monitoring system) June 13, 2008, 09:52:14 am Yahoo Message Number: 1212I have had a set of these on the MH since last January. They haveworked very well for me. Others that ordered this system after me. Didnot do so well getting them delivered. That's another story.One of the problems I have had is getting the sensors mounted on thefront aluminum wheels. The hole is only about a 1/4" larger than theSensors. No way to get at stem or sensor. Very hard to remove cap andcheck air pressure unless you have a straight truck type air gauge. Igot one at the FMCA rally that does very well. Also got a chuck thathas a straight end fitting.For the TPMS sensors I took a piece of 1 1/2" rubber hose and cut aangle on it to match the angle on the sensor's. This type of toolshould work with the different manufactures valve stem sensors. Bestpart it does not require a extension. Quote Selected