Skip to main content ↑ ↓
Topic: 2006 gulf stream Endura (Read 551 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

2006 gulf stream Endura

Yahoo Message Number: 7603
hi guys i have a 2006 gulfstream Endura on a Kodiak chassis i believe it to be a c5500 it is a gas 8.1 with Allison trans. Dose anyone have the model # for the koni shocks i would think they are the same as all Kodiak chassis of that rear.
Thanks Dan

Re: 2006 gulf stream Endura

Reply #1 –
Yahoo Message Number: 7604
They should be the same for all Kodiaks except for the rear shocks and that depend on the type of springs your RV has.




Re: 2006 gulf stream Endura

Reply #2 –
Yahoo Message Number: 7605
What is the model # of your Endura. Need to determine which rear axle your have. 13,500 or 19,500.

Best
Ron hall

Re: 2006 gulf stream Endura

Reply #3 –
Yahoo Message Number: 7606
hi ron
i have a 6331bk has the 19500 gvwr
ps i do have the original broadcast report on this hm this is every part that was used to make this mh

To: KodiakChassisClassC@yahoogroups.com
From: ronjhall@...
Date: Fri, 2 Sep 2011 19:25:04 +0000
Subject: [KodiakChassisClassC] Re: 2006 gulf stream Endura

What is the model # of your Endura. Need to determine which rear axle your have. 13,500 or 19,500.

Best
Ron hall

Re: 2006 gulf stream Endura

Reply #4 –
Yahoo Message Number: 7607
You have the 13,500 axle and springs. On my 13,500 axle the shocks are eye to eye. I have Bilstiens so I cannot help with part #.

Best
Ron Hall

Re: 2006 gulf stream Endura

Reply #5 –
Yahoo Message Number: 7608

They need to know 19500 or.23000 gvwr and look under the chassis to see.front and rear ate eye to eye or post to post. Just haf mine done Thursday.

~
Victor Burns | KI6IM
2008 Kodiak Dutchmen Diesel 34H

Re: 2006 gulf stream Endura

Reply #6 –
Yahoo Message Number: 7609

but what is missing is what chasssis each end unit was made on...

~
Victor Burns | KI6IM
2008 Kodiak Dutchmen Diesel 34H