Skip to main content ↑ ↓
Topic: Four Winds 34H mods (Read 487 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Four Winds 34H mods

Yahoo Message Number: 681
These are some projects that I am working on.

Replace the tail lights with LED lights. These are Bargman 84. They
are the same exterior size as the original Command lights. It just
needs a little extra wood removed.

http://autos.ph.groups.yahoo.com/group/KodiakChassisClassC/photos/view/6b9a?b=4

I replaced the original stove / oven with just a stove. I need to
make a door and add some trim. I needed a better place for pots and
pans. In over 10 years we have never used the stove anyhow. I may
decide to replace the microwave with a microwave/convection oven unit.

http://autos.ph.groups.yahoo.com/group/KodiakChassisClassC/photos/view/6b9a?b=5

When we first got the RV, I replace the rear view black & white
monitor with a color monitor. And I replaced the camera with a better
color camera. The original monitor was too high and too far back to
be really useful anyhow.

http://autos.ph.groups.yahoo.com/group/KodiakChassisClassC/photos/view/6b9a?b=6

Currently, I am trying to figure out where the best place to mount a
new Xantrex Prosine 2.0 inverter. The current inverter is 600W and is
located beneath the wardrode. This is about 15ft from the batteries
and this area is not quite large enough for the new inverter. It is
also kind of a crowded mess there. So, I may put it up by the
entertainment center.

David