Skip to main content ↑ ↓
Topic: Hot Water Question (Read 588 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Hot Water Question

Yahoo Message Number: 14471
Good morning-
First trip out this year with my GulfStream Endura- NO HOT WATER- worked fine last trip -
1) Plenty of water and pressure
2)Installed a new element last week
3) The hot water heater is lighting and the element plug is HOT

Just no hot water flowing-
I don't remember any Hot Water by pass valve-

Any suggestions?

Steve Phillips

Re: Hot Water Question

Reply #1 –
Yahoo Message Number: 14472
there should be a bypass valve. On my conquest it's behind the drawers under the hanging closet right aft of the galley... Bet you (or they if you had it done) didn't open the isolation.
Morrigan

Re: Hot Water Question

Reply #2 –
Yahoo Message Number: 14473
This is the only valve I remember
image1.JPG

Best,
Steve Phillips
VP of Sales
CLC/Custom LeatherCraft

Office 800.860.0331

Re: Hot Water Question [1 Attachment]

Reply #3 –
Yahoo Message Number: 14474
The valve shown in previous picture is on left side lower door, where water pump is. I have a 2006 Gulfstream Endura-6378

 

Re: Hot Water Question [1 Attachment]

Reply #4 –
Yahoo Message Number: 14475
that's the bypass valve. in the picture it is on bypass. the handle should rotate to the left so that the bent arrow on the handle shows flow to the normal flow point. i believe there is a descriptive picture behind the handle which should tell you how it should be for normal operation.



On Sunday, May 3, 2015 11:44 AM, "Steve Phillips clcmo@... [SuperCrvgroup]"  wrote: