Skip to main content
Topic: 2006 Jayco Seneca ZX Radio Nightmare (Read 170 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

2006 Jayco Seneca ZX Radio Nightmare

Yahoo Message Number: 17074
Hi everyone,

I have a 2006 Seneca ZX that I finally decided to upgrade my radio on . Easily pulled the dash apart and removed the old Magnadyne and figured the extra wiring was for the satellite radio.
So when I hooked up the new one and didn't have power to the radio I decided to remove the plugs that were attached to the old one and use butt connectors.
Well now I don't have any house power , nothing beyond the chassis works!
I did email jayco to try and get schematics, has anyone else done this, or have any suggestions???

Re: 2006 Jayco Seneca ZX Radio Nightmare

Reply #1
Yahoo Message Number: 17076
If you do not find the info you are looking for. Check out Diesel Place. At top of the Medium Duty Truck forum there links to electrical drawings.
https://www.dieselplace.com/#/forums/34
There is also information on the GM upfitter site.

https://www.gmupfitter.com/pages/body-builder-manuals
If you do not find the info you need. Post back someone will provide the info you need.
There is also a Facebook group called. Kodiak Kings.


Best
Ron Hall

 

Re: 2006 Jayco Seneca ZX Radio Nightmare

Reply #2
Yahoo Message Number: 17077
I'll find the schematic on my computer tomorrow but I remember a green wire (possibly with white trace) that fed 12v back to the coach. I lost power as well after a new radio. There was a green wire in the kick driver kick panel that ran back with the speaker wires and it needs constant 12v if I recall correctly.