Skip to main content ↑ ↓
Topic: FYI - fuse for 12 volt limit sensors on Four Winds (Read 437 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

FYI - fuse for 12 volt limit sensors on Four Winds

Yahoo Message Number: 2963

FWIW.... my front roof A/C and the water heater both quit on me at the same time.... I checked the voltages... all ok. Checked the fuses in the fuse block... all ok. Propane AND electric on water heater both quit, so I figured it had to be the 12 volt system going to the limit switches. So maybe the same wiring serves both the limit switches on the water heater AND the limit switches on the front roof air (the rear A/C was an option, so it isn't installed on the same wiring, and it continued to work). Maybe a bad ground? Nope.

If you lift the bed and take off the front cover over the slide stuff and converter and inverter, etc... check the several fuses going to the black boxes mounted on the right sidewall of the bed frame, one of those fuses had blown.

Denny